meow

firmware/.cargo/config.toml

@@ -0,0 +1,15 @@
+[build]
+target = "xtensa-esp32s2-espidf"
+
+[target.xtensa-esp32s2-espidf]
+linker = "ldproxy"
+runner = "espflash flash --monitor --before no-reset -a no-reset --no-stub"
+rustflags = [ "--cfg",  "espidf_time64"]
+
+[unstable]
+build-std = ["std", "panic_abort"]
+
+[env]
+MCU="esp32s2"
+# Note: this variable is not used by the pio builder (`cargo build --features pio`)
+ESP_IDF_VERSION = "v5.3.2"

firmware/.gitignore

@@ -0,0 +1,4 @@
+/.vscode
+/.embuild
+/target
+/Cargo.lock

firmware/Cargo.toml

@@ -0,0 +1,30 @@
+[package]
+name = "beans32"
+version = "0.1.0"
+authors = ["soffee <sophia@soffee.space>"]
+edition = "2021"
+resolver = "2"
+rust-version = "1.77"
+
+[[bin]]
+name = "beans32"
+harness = false # do not use the built in cargo test harness -> resolve rust-analyzer errors
+
+[profile.release]
+opt-level = "s"
+
+[profile.dev]
+debug = true    # Symbols are nice and they don't increase the size on Flash
+opt-level = "z"
+
+[features]
+default = []
+
+experimental = ["esp-idf-svc/experimental"]
+
+[dependencies]
+log = "0.4"
+esp-idf-svc = { version = "0.51", features = ["critical-section", "embassy-time-driver", "embassy-sync"] }
+
+[build-dependencies]
+embuild = "0.33"

firmware/build.rs

@@ -0,0 +1,3 @@
+fn main() {
+    embuild::espidf::sysenv::output();
+}

firmware/rust-toolchain.toml

@@ -0,0 +1,2 @@
+[toolchain]
+channel = "esp"

firmware/sdkconfig.defaults

@@ -0,0 +1,12 @@
+# Rust often needs a bit of an extra main task stack size compared to C (the default is 3K)
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=8000
+
+# Use this to set FreeRTOS kernel tick frequency to 1000 Hz (100 Hz by default).
+# This allows to use 1 ms granularity for thread sleeps (10 ms by default).
+#CONFIG_FREERTOS_HZ=1000
+
+# Workaround for https://github.com/espressif/esp-idf/issues/7631
+#CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
+#CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=n
+
+CONFIG_ESP_CONSOLE_UART=CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG

firmware/src/main.rs

@@ -0,0 +1,27 @@
+use esp_idf_svc::hal::{delay::FreeRtos, gpio::{PinDriver}, prelude::Peripherals};
+
+fn main() {
+    // It is necessary to call this function once. Otherwise some patches to the runtime
+    // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
+    esp_idf_svc::sys::link_patches();
+
+    // Bind the log crate to the ESP Logging facilities
+    esp_idf_svc::log::EspLogger::initialize_default();
+
+    let peripherals = Peripherals::take().unwrap();
+    let mut led_pin = PinDriver::output(peripherals.pins.gpio15).unwrap();
+    let mut led2_pin = PinDriver::output(peripherals.pins.gpio3).unwrap();
+
+    log::info!("Hello, world!");
+
+    loop {
+        led_pin.set_low().unwrap();
+        led2_pin.set_low().unwrap();
+        FreeRtos::delay_ms(1000);
+
+        led_pin.set_high().unwrap();
+        led2_pin.set_high().unwrap();
+        FreeRtos::delay_ms(1000);
+        println!("blink");
+    }
+}